Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Sliding Mode Controller Design for Stabilization of the Three-Phase Grid-Connected Inverters in the Presence of Unbalanced Local Loads 1 9 EN A. Zakipour Faculty of Electrical Engineering, Arak University of Technology (AUT), Arak, Iran. zakipour@arakut.ac.ir Y 0000000349005841 K. Aminzare Islamic Azad University, Science and Research Branch, Tehran, Iran. kuroush@gmail.com N M. Salimi Faculty of Engineering and Science, University of Greenwich, Kent, UK. m.salimi@gre.ac.uk N 0000000330073027 10.22068/IJEEE.18.3.2125 Considering the presence of different model parameters and controlling variables, as well as the nonlinear nature of DC to AC inverters; stabilizing the closed-loop system for grid current balancing is a challenging task. To cope with these issues, a novel sliding mode controller is proposed for the current balancing of local loads using grid-connected inverters in this paper. The closed-loop system includes two different controlling loops: a current controller which regulates the output current of grid-connected inverter and a voltage controller which is responsible for DC link voltage regulation. The main features of the proposed nonlinear controller are reactive power compensation, harmonic filtering and three-phase balancing of local nonlinear loads.  The developed controller is designed based on the state-space averaged modelling its stability and robustness are proved analytically using the Lyapunov stability theorem. The accuracy and effectiveness of proposed controlled approach are investigated through the PC-based simulations in MATLAB/Simulink. Harmonic and Reactive Compensation, Robustness and Stability, Shunt Active Power Filter, Sliding Mode Control, Three-Phase Current Balancing, Wide Operational Range. http://ijeee.iust.ac.ir/article-1-2125-en.html http://ijeee.iust.ac.ir/article-1-2125-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Optimal Temperature Control Scheme for Milk Pasteurization Process Using Different Tuning Techniques for a Proportional Integral Derivative Controller 10 26 EN A. O. Amole Department of Electrical/Electronics & Telecommunications Engineering, Bells University of Technology, Ota, Nigeria. latidassah@gmail.com N 0000000202758670 O. E. Olabode Department of Electrical/Electronics & Telecommunications Engineering, Bells University of Technology, Ota, Nigeria. 095082@gmail.com N D. O. Akinyele Department of Electrical and Electronics, Olabisi Onabanjo University, Ago-Iwoye, Nigeria akinyelescholar@gmail.com Y S. G. Akinjobi Department of Electrical/Electronics & Telecommunications Engineering, Bells University of Technology, Ota, Nigeria. N 10.22068/IJEEE.18.3.2170 Milk is one of the important dairy foods, which forms an essential building block in the feed formulation for infant and growing children, and adults alike. However, the quality of the final product largely depends on the temperature of the pasteurization process. It is, therefore, a necessity to ensure that optimum temperature is maintained during pasteurization process, as over-temperature kills all the essential nutrients contained in the final product and similarly, low temperature is not desirable as the final product will not yield the desired nutritional value. As a result, the application of optimal temperature control scheme is a critical requirement for milk pasteurization. It is, on this background, that this paper presents the use of a Proportional (P), Integral (I), Derivative (D) abbreviated as PID controller for optimal control of temperature in the milk pasteurization process. The milk pasteurization temperature was modeled based on the first law of thermodynamics, while three different tuning techniques namely; Zigler-Nichols (ZN), Chien-Hrones-Reswick (CHR) and Cohen-Coon (CC) were employed to tune the PID controller for optimal control of the milk pasteurization temperature. The control schemes were simulated in MATLAB/Simulink, and the performance of each tuning technique was evaluated using the rise time, settling time, peak amplitude, and overshoot. Results showed that ZN tuned PID controller gave the lowest rise time, settling time, and peak amplitude of 0.177s, 0.34s, and 0.993, respectively, while the lowest overshoot of 0% was attained by both ZN and CHR. Based on these results, CC tuned PID controller exhibited moderate rise time of 1.02s, settling time of 6.49s, and overshoot of 5.67%, indicating that its performance is comparatively preferred with respect to other tuning techniques investigated. The results of this research find application in diary industries as it provides insight into the appropriate tuning technique for the PID controller to ensure optimum temperature control during milk pasteurization. Controller,Milk,Pasteurization,PID,Temperature,Tuning, http://ijeee.iust.ac.ir/article-1-2170-en.html http://ijeee.iust.ac.ir/article-1-2170-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Synthesis of Antenna Arrays of Maximum Directivity for a Specified Beamwidth 27 32 EN M. Khalaj-Amirhosseini School of Electrical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran. khalaja@iust.ac.ir Y 10.22068/IJEEE.18.3.2198 Linear antenna arrays are synthesized to have maximum directivity for a specified beamwidth. The directivity is maximized subject to a given beamwidth such as null to null or half power one. The excitation currents are obtained using a matrix equation obtained from the Lagrange multiplier method. The performance of the proposed method is studied by means of some examples. The synthesized arrays have the pre-specified beamwhidths and their directivity is close to the number of elements. Antenna Array Synthesis, Maximum-Directivity Arrays, Specified Beamwidth Arrays. http://ijeee.iust.ac.ir/article-1-2198-en.html http://ijeee.iust.ac.ir/article-1-2198-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Comparison of Radial Flux Air-cored Synchronous Superconducting Machine Topologies 33 39 EN S. Hasanzadeh Electrical and Computer Engineering, Qom University of Technology, Iran. hasanzadeh@qut.ac.ir Y 0000000322729970 M. Yazdanian Electrical and Computer Engineering, Qom University of Technology, Iran. m.yazdanian@gmail.com N 0000000258889930 S. M. Salehi Electrical and Computer Engineering, Qom University of Technology, Iran. sm.salehi3@gmail.com N 0000000329730691 10.22068/IJEEE.18.3.2288 Over the past four decades of developing superconducting machines, many topologies have been suggested. The most successful topology of high-power superconducting (HPS) machines is an air-cored radial flux synchronous machine. There are two possible topologies for this type of machine, rotational field, and stationary field. In this paper, the relative advantages and disadvantages of these topologies are compared in detail. Analytical study of these topologies shows that the inversed machine topology leads to more efficient high-temperature superconductor (HTS) wire utilization and hence more economical production. In order to confirm the result obtained by analytical calculations, 2-D finite element model (FEM) of the machine is utilized. Finite Element Model (FEM), Inversed Topology, Machine Design, Superconducting Machine. http://ijeee.iust.ac.ir/article-1-2288-en.html http://ijeee.iust.ac.ir/article-1-2288-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Design and Implementation of High Speed and Low Power 12-Bit SAR ADC Using 22nm FinFET 40 53 EN G. Vasudeva Electronics and Communication Engineering Department, Dayananda Sagar Academy of Technology and Management, Bangalore, Karnataka, India. devan.vasu921@gmail.com Y B. V. Uma Electronics and Communication Engineering Department, RV College of Engineering, Visvesvaraya Technological University, Belagavi, Karnataka, India. umabv@rvce.edu.in N 10.22068/IJEEE.18.3.2336 Successive approximation register (SAR) analog to digital converter (ADC) architecture comprises submodules such as comparator, digital to analog converters (DAC), and SAR logic. Each of these modules imposes challenges as the signal makes transition from analog to digital and vice-versa. Design strategies for optimum design of circuits considering 22nm FinFET technology meeting area, timing, power requirements, and ADC metrics are presented in this work. Operational Transconductance Amplifier (OTA) based comparator, 12-bit two-stage segmented resistive string DAC architecture, and low power SAR logic are designed and integrated to form the ADC architecture with a maximum sampling rate of 1 GS/s. Circuit schematic is captured in cadence environment with optimum geometrical parameters and performance metrics of the proposed ADC are evaluated in MATLAB environment. Differential nonlinearity and integral nonlinearity metrics for the 12-bit ADC are limited to +1.15/-1 LSB and +1.22/-0.69 LSB respectively. ENOB of 10.1663 with SNR of 62.9613 dB is achieved for the designed ADC measured for conversion of input signal of 100 MHz with 20dB noise. ADC with sampling frequency up to 1 GSps is designed in this work with low power dissipation of less than 10 mW. 22nm FinFET, Folded Resistive String, High Speed, Low Power, Operational Transconductance Amplifier, SAR ADC. http://ijeee.iust.ac.ir/article-1-2336-en.html http://ijeee.iust.ac.ir/article-1-2336-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 A Brief Review of Space Vector Modulation (SVM) Methods and a New SVM Technique Based on the Minimum and Maximum of the Three-Phase Voltages 54 72 EN H. Benbouhenni Department of Electrical & Electronics Engineering, Faculty of Engineering and Architecture, Nisantasi University, 34481742 Istanbul, Turkey. habib0264@gmail.com N 0000000182534863 N. Bizon Faculty of Electronics, Communication and Computers, University of Pitesti, 110040 Pitesti, Romania. nicubizon@yahoo.com Y I. Colak Department of Electrical & Electronics Engineering, Faculty of Engineering and Architecture, Nisantasi University, 34481742 Istanbul, Turkey. ilhcol@gmail.com N 10.22068/IJEEE.18.3.2358 The space vector modulation (SVM) method was recently proposed and captured the interest of scientific research in the following years. In this paper, besides a brief review of the SVM methods proposed in the literature, a new SVM strategy based on the calculation of the minimum (Min) and maximum (Max) of three-phase voltages is proposed. The proposed SVM technique does not have to calculate the sector and angle, as is done in the traditional SVM technique. Therefore, it is the easiest technique to accomplish compared to the traditional SVM method and other existing methods. Compared with the traditional pulse width modulation (PWM), the advantage of using this new SVM strategy is that the scheme is simple and the total harmonic distortion (THD) value in the output of the two-level inverter is minimized. The technology has been simulated by MATLAB/Simulink, and then implemented on a real traditional two-level inverter using the dSPACE card. It is worth reporting the reduction obtained for THD using the proposed SVM technique (where THD is about 70%) compared to the traditional PWM technique (where THD is about 79.5%). dSPACE, Pulse Width Modulation, Space Vector Modulation, Total Harmonic Distortion, Two-Level Inverter. http://ijeee.iust.ac.ir/article-1-2358-en.html http://ijeee.iust.ac.ir/article-1-2358-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 A New Regionalization Scheme for Wide-Area Backup Protection of Power Network 73 84 EN Gh. Khandar-Shahabad Department of Electrical Engineering, Islamic Azad University, Shabestar Branch, Shabestar, Iran. ghkhandar@yahoo.com N J. Beiza Department of Electrical Engineering, Islamic Azad University, Shabestar Branch, Shabestar, Iran. jamalbeiza@gmail.com Y 0000000217246870 J. Pouladi Department of Electrical Engineering, Islamic Azad University, Shabestar Branch, Shabestar, Iran. pouladi.jaber@gmail.com N T. Abedinzadeh Department of Electrical Engineering, Islamic Azad University, Shabestar Branch, Shabestar, Iran. taherabedinzade@yahoo.com N 10.22068/IJEEE.18.3.2366 A new regionalization algorithm is presented to improve wide-area backup protection (WABP) of the power system. This method divides the power system into several protection zones based on the proposed optimal measurement device (MD) placement and electrical distances. The modified binary particle swarm optimization is used to achieve the optimal MD placement in the first step. Next, the power system is divided into small protection zones (SPZ) using the topology matrix of the power system and MD locations. Finally, the SPZs are combined to accomplish the main protection zones and protection centers according to electrical distances, degree of buses, and communication link constraints. The introduced regionalization formulation can help provide a rapid and secure WABP for power systems. This method was applied to several IEEE standard test systems, and the simulation results demonstrated the effectiveness of the proposed scheme. Communication Constraints, Electrical Distance, MD Placement, Power System Regionalization, Protection Zone, Wide-Area Backup Protection. http://ijeee.iust.ac.ir/article-1-2366-en.html http://ijeee.iust.ac.ir/article-1-2366-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Design and Optimizing of a GaN HEMT Power Amplifier Based on the Inclined Planes System Optimization Algorithm for Wireless Applications 85 94 EN M. Soruri Faculty of Electrical and Computer Engineering, University of Birjand, Birjand, Iran. mohamad.soruri@birjand.ac.ir N S. M. Razavi Faculty of Electrical and Computer Engineering, University of Birjand, Birjand, Iran. smrazavi@birjand.ac.ir Y M. Forouzanfar Faculty of Electrical and Computer Engineering, University of Birjand, Birjand, Iran. forouzanfar@birjand.ac.ir N 10.22068/IJEEE.18.3.2369 Power amplifier is one of the main components in the RF transmitters. It must provide various stringent features that can lead to complicating the design. In this paper, a new optimizing method based on the inclined planes system optimization algorithm is presented for the design of a discrete power amplifier. It is evaluated in a 2.4-3 GHz power amplifier, which is designed based on “Cree’s CGH40010F GaN HEMT”. The optimization goals are input and output return losses, Power Added Efficiency, and Gain. Large signal simulation of the optimized power amplifier shows a good performance across the bandwidth. In this frequency range, the input and output return losses are about lower than -10 dB, the Power Added Efficiency is greater than 51%, while the Gain is higher than 13.5 dB. A two-tone test with a frequency space of 1 MHz is applied for the linearity evaluation of the designed power amplifier. The obtained result shows that the power amplifier has good linearity with a low memory effect. Gain, Inclined Planes System Optimization, Optimization, Power Added Efficiency, Power Amplifier. http://ijeee.iust.ac.ir/article-1-2369-en.html http://ijeee.iust.ac.ir/article-1-2369-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 FACTS Technology: A Comprehensive Review on FACTS Optimal Placement and Application in Power System 95 109 EN R. Gandotra Department of Electrical Engineering, Gautam Buddha University, Greater Noida, U.P. India. rupikagandotra01@gmail.com Y 0000000291192284 K. Pal Department of Electrical Engineering, Gautam Buddha University, Greater Noida, U.P. India. kirti.pal@gbu.ac.in N 10.22068/IJEEE.18.3.2390 The growing demand increases the maximum utilization of transmission and distribution lines which causes overloading, high losses, instability, contingency, and congestion. To enhance the performance of AC transmission and distribution systems FACTS devices are used. These devices assist in solving different issues of transmission lines such as instability, congestion, power flow, and power losses. Advancement in developed technology leads to the development of special application-based FACTS controllers. The main issues are concerned while placing the FACTS controller in the transmission and distribution lines to maximize the flow of power. Various methods like analytic method, arithmetic programming approaches, meta-heuristic optimization approaches, and hybrid approaches are being employed for the optimal location of FACTS controllers. This paper presents a review of various types of FACTS controllers available with both analytical and meta-heuristic optimization methods for the optimal placement of FACTS controllers. This paper also presents a review of various applications of FACTS devices such as stability improvement, power quality, and congestion management which are the main issues in smart power systems. Today’s smart power systems comprise the smart grids with smart meters and ensure continuous high quality of power to the consumers. Congestion Management, FACTS Controllers, Optimal Size, Power Quality, Stability Improvement, Transmission Lines. http://ijeee.iust.ac.ir/article-1-2390-en.html http://ijeee.iust.ac.ir/article-1-2390-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 A Review on the Power Circuit Topologies of Current Source Inverters in Photovoltaic Applications 110 134 EN N. Danapour Department of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran. nasserdanapour@gmail.com Y E. Akbari Department of Electrical and Computer Engineering, Mazandaran University of Science and Technology, Mazandaran, Iran. akbari.ehsan101@gmail.com N M. Tarafdar-Hagh Department of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran. tarafdar@tabrizu.ac.ir N 10.22068/IJEEE.18.3.2404 In electricity generation through photovoltaic cells, efficient inverters are required to inject the generated power into the grid. Among the inverters connected to the grid, current source inverters despite their advantages are used less than voltage source ones. Different circuits are presented for these converters. In this paper, several power circuit topologies of the current source inverters, which are an interface between solar panels and the grid, are reviewed. Also, the inverters are compared from the point of some indexes like efficiency, voltage transmission ratio, total harmonic distortion, leakage currents, and their reduction methods. The importance of these indexes is investigated too. Categorization is for full-bridge inverters and special structures groups. The first group includes the conventional inverter, 4-leg inverter, CH7 CSI, H7 CSI, three-mode, and other structures. The second group consists of inverters with special structures and is independent of the conventional CSI. The summary of the studies is presented in a table. Current Source Inverters, Full-Bridge Inverters, Leakage Current, Photovoltaic Systems, THD, Transformer-less PV System. http://ijeee.iust.ac.ir/article-1-2404-en.html http://ijeee.iust.ac.ir/article-1-2404-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Adaptive Z2 Protection Scheme Based on Setting Groups for Distance Relaying of Wind Farms Integrated Power Systems 135 146 EN Y. Fattahyan University of Science and Technology of Mazandaran, Mazandaran, Iran. yousef.fattahyan@mazust.ac.ir N N. Ramezani University of Science and Technology of Mazandaran, Mazandaran, Iran. ramezani@mazust.ac.ir Y 0000000217735586 I. Ahmadi University of Science and Technology of Mazandaran, Mazandaran, Iran. iraj.ahmadi@mazust.ac.ir N 0000-0001-9021-3277 10.22068/IJEEE.18.3.2407 Using doubly-fed induction generator (DFIG) based onshore wind farms in power systems may lead to mal-operation of the second zone (Z2) of distance protection due to the uncertain number of available wind turbines on the one hand and the function of DFIGs control system to maintain the bus voltage on the other hand. In such cases, variable injected current by the wind farm causes distance relay fall in trouble to distinguish whether the fault point is in the Z2 operating area or not. In the current study, an adaptive settings scheme is proposed to determine the Z2 setting value of distance relays for such cases. The proposed method is based on the adaptive approach and the settings group facility of the commercial relays. The proposed method applies the k-means clustering approach to decrease the number of setting values calculated by the adaptive approach to the number of applicable settings group in the distance relay and uses the Particle Swarm Optimization (PSO) algorithms to achieve the optimum setting values. The high accuracy of the proposed method in comparison with other methods, suggested in the literatures, is shown by applying them to the IEEE 14-bus grid. DFIG, Distance Relay, K-Means Algorithm, PSO, Setting Groups. http://ijeee.iust.ac.ir/article-1-2407-en.html http://ijeee.iust.ac.ir/article-1-2407-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 Genetic Algorithm Based Approach for Frequency Switchable Dual-Band Patch Antenna 147 154 EN K. Fertas Signals and Systems Laboratory, Institute of Electrical and Electronic Engineering, University M'hamed Bougara of Boumerdes, Algeria. khelil.fertas@g.enp.edu.dz Y F. Fertas Signals and Systems Laboratory, Institute of Electrical and Electronic Engineering, University M'hamed Bougara of Boumerdes, Algeria. f.fertas@univ-boumerdes.dz N S. Tebache Electronics Department, Ecole Nationale Polytechnique, El-Harrach, Algiers, Algeria. sofiane@gmail.com N A. Mansoul Division Telecom, Centre de Développement des Technologies Avancées (CDTA), Baba Hassen, Algiers, Algeria. mansoul@gmail.com N R. Aksas Electronics Department, Ecole Nationale Polytechnique, El-Harrach, Algiers, Algeria. aksas@gmail.com N 10.22068/IJEEE.18.3.2454 In this paper, a frequency switchable antenna design using genetic algorithms (GAs) for dual band WiMAX (3.5GHz) and WLAN (5.2GHz) applications is proposed. The area of the radiating patch element is divided into 2 mm square cells, with each cell assigned a conducting or non-conducting characteristic. To realize frequency reconfiguration, switches are incorporated into appropriate locations to activate/deactivate corresponding cells. The on/off states of the switches are represented by the presence or absence of conductor, respectively. Hence, the proposed approach allows the antenna to operate as mono-band or dual-band radiator according to the desired application. Further, measurements and simulations are carried out and a reasonable agreement is achieved. Genetic Algorithm, Dual-Band Antenna, Switchable Frequency Band. http://ijeee.iust.ac.ir/article-1-2454-en.html http://ijeee.iust.ac.ir/article-1-2454-en.pdf

Iran University of Science and Technology (IUST) Iranian Journal of Electrical and Electronic Engineering 1735-2827 1735-2827 18 3 2022 9 1 A Laplacian Approach to Locate Source of Forced Oscillations Under Resonance Conditions Based on Energy-Driven Multilateral Interactive Pattern 155 171 EN A. Hesami Naghshbandy Department of Electrical Engineering, University of Kurdistan, Sanandaj, Iran. hesami@uok.ac.ir Y 000000030157309X K. Naderi Department of Electrical Engineering, University of Kurdistan, Sanandaj, Iran. Ka.naderi@uok.ac.ir N U. D. Annakkage Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, Manitoba, Canada. udaya.annakkage@umanitoba.ca N 0000000213616694 10.22068/IJEEE.18.3.2455 The most challenging circumstance of forced oscillations (FOs) is when the power system is forced to oscillate at its natural frequencies. This paper uses a novel PMU data-driven mechanism to pinpoint the source of such phenomena under resonance. Following the detection of FOs, the instantaneous changes in the output power and angular velocity of the rotors are calculated. Accordingly, an energy-driven multilateral interaction pattern is obtained for all synchronous generators. Next, an appropriate positive weighted undirected graph is constructed through these functional patterns based on the spectral graph theory. These quantitative indicators are then analyzed through the eigenvalue spectrum of the normalized Laplacian matrix of the system graph reduced to the internal generator buses. Finally, the smallest value in eigenvectors corresponding to the two largest eigenvalues reveals the location of the source. The proposed methodology’s validation and verification studies have been performed on the WECC 3-machine 9-bus and New England 10-machine 39-bus benchmark power systems modeled in the Real-Time Digital Simulator (RTDS) and then analyzed in the MATLAB environment. The proposed methodology revealed to be fast and accurate in locating the source of FOs under challenging resonance situations with promising results while addressing the generator side origins. Forced Oscillation, Laplacian Matrix, Multilateral Interactive Pattern, Resonance, Source Locating, Spectral Graph Theory. http://ijeee.iust.ac.ir/article-1-2455-en.html http://ijeee.iust.ac.ir/article-1-2455-en.pdf