Volume 8, Issue 2 (June 2012)                   IJEEE 2012, 8(2): 146-153 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Afjei E. Automatic Phase Advancing in a Stand-Alone Switched Reluctance Generator at Different High Speeds for Desired Output Voltage. IJEEE 2012; 8 (2) :146-153
URL: http://ijeee.iust.ac.ir/article-1-422-en.html
Abstract:   (6534 Views)
The switched reluctance motor is a singly excited, doubly salient machine which can be used in generation mode by selecting the proper firing angles of the phases. Due to its robustness, it has the potential and the ability to become one the generators to be used in harsh environment. This paper presents an energy conversion by a Switched Reluctance Generator (SRG) when bifilar converter circuit and discrete position sensors are employed. As the generator’s speed increases by a prime mover the shape of current waveform changes in such a way that limits the production of generating voltage. At high speeds, it is possible for the phase current never reaches the desired value to produce enough back-emf for sufficient voltage generation, therefore, the output power falls off. In order to remedy this problem, the phase turn on angle is advanced in a way that the phase commutation begins sooner. Since one of the advantages of this type of generator is its variable speed then, the amount of advancing for the turn on angle should be accomplished automatically to obtain the desired output voltage according to the speed of the generator, meaning, as the generator speed increases so should the turn on angle and vice versa. In this respect, this paper introduces an electronic circuit in conjunction with the position sensors and the drive converter to achieve this task for a desired output voltage when a SRG feeding a resistive load. To evaluate the generator performance, two types of analysis, namely numerical technique and experimental studies have been utilized on a 6 by 4, 30 V, SRG. In the numerical analysis, due to highly non-linear nature of the motor, a three dimensional finite element analysis is employed, whereas in the experimental study, a proto-type generator and its circuitries have been built and tested using bifilar converter. A linear analysis of the current waveform for the generator under different advancements of the turn on angle has been performed numerically and experimentally and the results are presented.
Full-Text [PDF 541 kb]   (3323 Downloads)    
Type of Study: Research Paper | Subject: Electrical Machines Design
Received: 2011/08/01 | Revised: 2013/05/25 | Accepted: 2013/05/25

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.