Guide for Authors


 

Author(s) should submit their manuscripts through the Iranian Journal of Electrical and Electronic Engineering (IJEEE) submission system electronically. All submission and further tracking of submitted papers should be done through ijeee.iust.ac.ir. Also, all papers submitted will be checked with a powerful plagiarism detection software.

Scope

The Iranian Journal of Electrical & Electronic Engineering (IJEEE) is an open-access peer-reviewed journal devoted to publishing original papers of high technical standard with a suitable balance of practice and theory related to the broad topics in the field of electrical engineering. All topics are treated with similar emphasis, such as:

  • Biomedical Engineering,
  • Communication Engineering,
  • Control Engineering,
  • Electronic Engineering,
  • Power Engineering

Publication Fee

The author does not have to pay any charges for publication. All the publication charges are paid by the Iran University of Science and Technology (IUST) and all the published articles are made open access free of charge.

Before Submitting

Please read the two forms (1-Statement of Originality and 2-Publication Agreement and Assignment of Copyright) before the submission. These forms are just for the authors' information and there is no need to upload them. The corresponding author will be requested to fill it online during the submission process. Filling and uploading three forms of
1. Conflict of Interest,
2. Cover Letter,
3. Declaration Credit Author Statement
is mandatory during the submission process.
So, before starting the submission, please click the following link to access these forms and fill them to upload during the submission process.

Download Forms

Authors Contact Details

The corresponding author must present her/his academic e-mail address. According to current Editorial policy, students cannot submit the articles and corresponding authors should be academic staff of a university and hold at least a Ph.D. degree. If you are a student and wish to submit your article, please request your supervisor/professor to submit it as the corresponding author.

Referees

To finalize your submission, please suggest 3 reviewers along with their email addresses to facilitate the reviewing process.

Peer-Review Process

IJEEE operates a single-blind review process. All submitted manuscripts will be initially assessed by the editor-in-chief for suitability for the journal. Papers deemed suitable are then typically sent to a minimum of two independent expert reviewers to assess the scientific quality of the paper. The Editor is responsible for the final decision regarding the acceptance or rejection of articles.

Cover Letter

Cover letters are required for all submissions. They must include a statement of originality and confirmation that the paper has not been submitted to any other journals or conferences. Confirmation and any relevant details of permissions and any information regarding the funding of research should be clearly stated in the cover letter when submitting a paper to the IJEEE. Here you can see an example.

Research Data

The precise notion of what constitutes research data will differ from field to field but broadly speaking it refers to the result of observations or experimentations that validate research findings and which are not already published as part of a journal article. Research data can include but are not limited to: raw data, processed data, software, algorithms, protocols, methods, materials.
Data sharing enables others to reuse the results of experiments and supports the creation of new science that is built on previous findings, making the research process more efficient. Data sharing also supports transparency and reproducibility, building trust in science. IJEEE supports researchers who want to store, share, discover and reuse data, and is committed to working with other stakeholders to address challenges in making data more effective.
Although much research data is disseminated as part of journal articles, a host of other data is not made available through article publication. This policy concerns research data that often underlies, but exists outside of research articles. IJEEE's research data policy provides the framework for support and engagement in making this hidden data discoverable.
Authors can read our policies and guidlines on the research data sharing
here.

Preparation of Manuscripts

The prospective authors should prepare one file for each manuscript with full author's information (name, Email address, postal address, affiliation, and biography). Manuscripts are better to be typed one-column, double-spaced; 12 point Times New Roman font and 2.5-cm margins in standard A4 paper (210mm by 297mm). The paper should be reasonably subdivided into sections and, if necessary, subsections. As IJEEE does not have paper-printed publication anymore, there are no page number limits.

Language

IJEEE publications are in the English language. As all the published papers are accessed internationally so it is required to prepare your paper in proper English language. If your native language is not English, please get a native English-speaking person to carefully proofread your paper. All the submissions with broken English will be rejected by the secretary without any review.

Abbreviations and Acronyms

Define abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Abbreviations such as IEEE, SI, ac, and dc do not have to be defined. Abbreviations that incorporate periods should not have spaces: write “C.N.R.S.,” not “C. N. R. S.” Do not use abbreviations in the title unless they are unavoidable.

Equations

If you are using Microsoft Word, use either the Microsoft Equation Editor or the MathType for equations in your paper.

Number equations consecutively with equation numbers in parentheses flush with the right margin, as in Eq. (1).

The detailed sizes of equations are Full: 10pt, Subscript/Superscript: 5pt, Sub- Subscript/Superscript: 4pt, Symbol: 13pt and Sub-Symbol: 10pt and equations are non-italic and non-bold.

Be sure that the symbols in your equations have been defined before the equation appears or immediately after it. When you refer to equations in the text, refer to it as: "Eq. (1)" or "Equation (1)" except at the beginning of a sentence: "Equation (1) is used...."

Units

Use either SI (MKS) or CGS as primary units. (SI units are strongly encouraged.) Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity in an equation.

The SI unit for magnetic field strength H is A/m. However, if you wish to use units of T, either refer to magnetic flux density B or magnetic field strength symbolized as µ0H. Use the center dot to separate compound units, e.g., “A·m2.”

Structure Guidelines

All the submitted manuscripts should include Title, Abstract, Keywords, Nomenclature, Introduction, Materials and Methods, Results and Discussion, Conclusion, Appendix, Acknowledgements, References, and Biographies.

Title

Good titles have three strong parts: keywords, emphasis, and impact. The title is a critical element of a paper. Even your manuscript is perfectly written, a weak title can affect reviewers’ and editors’ viewpoints.

Abstract

The abstract is a brief (150-200 words) synopsis of your full paper. No citations or cross-references should be used there. It is used to provide a quick outline of your research, giving the reader an overview of the paper. This is an important aspect of your paper, as this description can pursue the reader to continue and read your full paper. In particular, the main contributions of the paper should be explicitly mentioned in the abstract. An interesting abstract is made up of the following sections:

  • Aim and scope
  • Method
  • Results
  • Conclusions

Keywords

Keywords should be so chosen that they best describe the contents of the paper. List 4 to 6 keywords in alphabetical order, separated by commas, such as Digital Redesign, Optimal Control, Robotics.

Introduction

In this section, the authors should provide a short text highlighting the subject of the paper and present a sufficient literature survey, avoiding a detailed comprehensive literature survey and summary of the results.

Highlights

Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the paper and may be submitted in a separate file in the online submission system or mentioned in the main paper. Please use “Highlights” in the file comment and include 3 to 5 bullet points. These serve two key purposes:

  • Providing an opportunity to authors to highlight the impact of their research;
  • Helping to inform readers that a paper is of interest or relevance to them.

Materials and Methods

In the Material and Method, all achievements performed throughout the work should be presented along with all modeling and equations used such that the reader can follow the work done easily. Try to refer to all the literature used in your work.

Results and Discussion

Results must be explicit and answer the main research question along with the importance of the presented work. Don’t repeat results in the discussion but highlight your contributions here.

Illustrations

Figure captions should be below the figures; table captions should be above the tables. Try to place the figures and tables after their first citation in the text. If your figure has two parts, include the labels “(a)” and “(b)” as part of the artwork. Please verify that the figures and tables you mention in the text actually exist. Please do not include captions as part of the figures. Do not put captions in “text boxes” linked to the figures. Do not draw borders outside the figures. Use the abbreviation (e.g., “Fig. 1”) even at the beginning of a sentence. Do not abbreviate “Table.”

All half-tone illustrations (pictures/photographs) should be clear black and white prints. Do not use photocopies. Figure axis labels are often a source of confusion. Use words rather than symbols. As an example, write the quantity “Magnetization,” or “Magnetization M,” not just “M.” Put units in parentheses. Do not label axes only with units. As in Fig. 1, for example, write “Magnetization (A/m)” or “Magnetization (A x m-1),” not just “A/m.” Do not label axes with a ratio of quantities and units. For example, write “Temperature (K),” not “Temperature/K.”

Multipliers can be especially confusing. Write “Magnetization (kA/m)” or “Magnetization (103 A/m).” Do not write “Magnetization (A/m) 1000” because the reader would not know whether the top axis label in Fig. 1 meant 16000 A/m or 0.016 A/m.

AWT IMAGE

Fig. 1 Magnetization as a function of the applied field. Note that “Fig.” is abbreviated.

Finally, note that your illustrations should have an appropriate resolution for publishing.

Conclusion

Finally “say what you said”, i.e. express your achievements and major contributions and what you did not consider and kept for others to work on.

Appendix

Appendices, if needed, appear before the acknowledgment.

References

List and number all references at the end of the paper. Multiple references are each numbered with separate brackets. When referring to them in the text, type the corresponding reference number in square brackets as shown at the end of this sentence. Number the citations consecutively. The sentence punctuation follows the brackets. Do not use "Ref. [3]" or "reference [3]" except at the beginning of a sentence. Capitalize only the first word in the paper title, except for proper nouns and element symbols.

Please use the IEEE referencing style for citation. More information on how to write references using this style can be found here. Authors can download the EndNote output style from the following link: EndNote Output Styles.

An average research paper should reference at least 20 works, the bulk of which should be recently published (i.e. within the last 5 years) leading-edge articles in the field, preferably from books, top journals, or conferences. Authors should compare their own findings to these recent researches and demonstrate how their work improves on them in order to demonstrate that their work shows a significant advance over the state of the art a pre-requisite for publication in IJEEE.

Examples of the ways in which references should be cited are given below:

  • Website:
    • ​​[1] PJM-MISO Joint and Common Market, White Paper, Jul. 2005. [Online]. Available: http://www.miso-pjm.com.
  • Books:
    • ​​​​[2] A. B. Smith, C. Jones, D. James, and E. Harrison-Abbott, The title of the book. New York, NY, USA: XYZ Press, 2018.
  • Journal Paper:
    • ​​​​[3] A. B. Smith and C. James, “The title of the paper,” Iranian Journal of Electrical and Electronic Engineering, Vol. 14, No. 3, pp. 1418–1425, Aug. 2018.
    • ​​​​[4] C. Jones and D. James, “The title of the paper,” Iranian Journal of Electrical and Electronic Engineering, to be published.
  • Conference Paper:
    • [5] D. James and E. Harrison-Abbott, “The title of the paper,” in Proc. 17th  XYZ Conf. (XYZC), Tehran, Iran, 2018.

Biographies

DrAll Authors may include biographies (less than 100 words) at the end of their papers. It may contain a place and/or date of birth (list place, then date). Next, the author’s educational background is listed. The degrees should be listed with the type of degree in what field, which institution, city, state, and country, and year degree was earned. Finally, the author’s work experience, current and previous jobs, publications, and any awards are listed.

If a photograph is provided, the biography will be indented around it. The photograph is placed at the top left of the biography. Personal hobbies will be deleted from the biography.

 



Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.