Volume 17, Issue 2 (June 2021)                   IJEEE 2021, 17(2): 1802-1802 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Jabbari A, Dubas F. The Effect of Magnet Width and Iron Core Relative Permeability on Iron Pole Radii Ratio in Spoke-Type Permanent-Magnet Machine: An Analytical, Numerical and Experimental Study. IJEEE 2021; 17 (2) :1802-1802
URL: http://ijeee.iust.ac.ir/article-1-1802-en.html
The Effect of Magnet Width and Iron Core Relative Permeability on Iron Pole Radii Ratio in Spoke-Type Permanent-Magnet Machine: An Analytical, Numerical and Experimental Study
A. Jabbari , F. Dubas
Abstract:   (3382 Views)
In this paper, we present a mathematical model for determining the optimal radius of the iron pole shape in spoke-type permanent-magnet (PM) machines (STPMM) in order to minimize the pulsating torque components. The proposed method is based on the formal resolution of the Laplace’s and Poisson’s equations in a Cartesian pseudo-coordinate system with respect to the relative permeability effect of iron core in a subdomain model. The effect of PM width on the optimal radius of the iron pole has been investigated. In addition, for initial and optimal machines, the effect of the iron core relative permeability on the STPMM performances was studied at no-load and on-load conditions considering three certain PM widths. Moreover, the effect of iron pole shape on pulsating torque components with respect to certain values of iron core relative permeability was studied by comparing cogging torque, ripple and reluctance torque waveforms. In order to validate the results of the proposed analytical model, three motors with different PM widths were considered as case studies and their performance results were compared analytically and numerically. Two prototype spoke-type machines were fabricated and the experimental results were compared to analytical results. It can be seen that the analytical modeling results are consistent with the numerical analysis and experimental results.
Keywords: Analytical Model , Pulsating Torque Components , Iron Pole Shape Optimization , Finite Iron Core Relative Permeability , Quasi-Cartesian Coordinates , Subdomain Technique , Experimental Validation
Full-Text [PDF 2899 kb]   (990 Downloads)    
  • An analytical model has been presented to determine optimal iron pole shape in STPM machine considering magnet width as well as the iron core relative permeability.
  • The proposed model is obtained by solving the Maxwell equations by considering the appropriate boundary conditions in the Cartesian pseudo-coordinate system.

Type of Study: Research Paper | Subject: Special Electric Machines
Received: 2020/01/31 | Revised: 2020/04/11 | Accepted: 2020/04/21
Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.