Volume 19, Issue 2 (June 2023)                   IJEEE 2023, 19(2): 2752-2752 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Rashid M K, Mohammed A M. A Reduction Method of Cogging Torque for Magnetic Gears. IJEEE 2023; 19 (2) :2752-2752
URL: http://ijeee.iust.ac.ir/article-1-2752-en.html
Abstract:   (1364 Views)
Nowadays, magnetic gears (MGs) have become an alternative choice for mechanical gears because of their low maintenance, improved durability, indirect contact between inner and outer rotors, no lubrication, and high efficiency. Generally, although these advantages, MGs suffer from inherent issues, mainly the cogging torque. Therefore, cogging torque mitigation has become an active research area. This paper proposed a new cogging torque mitigation approach based on the radial slit of the ferromagnetic pole pieces of MGs. In this method, different numbers and positions of slits are applied. The best results are gained through an even number of slits which shows promising results of cogging torque mitigation on the inner rotor with a small mitigation in the mean torque on both rotors. This work is done by using Simcenter and MATLAB software packages. The inner rotor’s cogging torque has mitigated to 81.9 %, while the outer rotor’s cogging torque is increased only by 2.75 %.
Full-Text [PDF 996 kb]   (769 Downloads)    
Type of Study: Research Paper | Subject: Electrical Drives
Received: 2022/12/15 | Revised: 2023/06/06 | Accepted: 2023/06/11

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.