Volume 18, Issue 2 (June 2022)                   IJEEE 2022, 18(2): 117-130 | Back to browse issues page


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Saeedinia S, Shamsi-Nejad M A, Eliasi H. A Two-Stage Grid-Connected Single-Phase SEPIC-based Micro-Inverter with High Efficiency and Long Lifetime for Photovoltaic Systems Application. IJEEE 2022; 18 (2) :117-130
URL: http://ijeee.iust.ac.ir/article-1-2355-en.html
Abstract:   (2469 Views)
This paper proposes a grid-connected single-phase micro-inverter (MI) with a rated power of 300 W and an appropriate control strategy for photovoltaic (PV) systems. The proposed MI is designed based on a two-stage topology. The first stage consists of a SEPIC DC-DC converter with high voltage gain to step up the voltage of the PV panel and harness the maximum power, while the second stage includes a full-bridge DC-AC converter. The advantages of the proposed MI are the use of fewer components to provide suitable output voltage level for connection to a single-phase grid, continuous input current, limited voltage stress on the switch, high efficiency, long operational lifetime, and high reliability. Lower input current ripple and the presence of film capacitors in the power decoupling circuit increase the lifetime and reliability of the proposed MI. In the proposed MI, the active power decoupling circuit, which is normally used in a typical single-stage SEPIC-based MI, is eliminated to achieve both a long lifetime and high efficiency. The operating principles of the proposed MI are analyzed under different conditions. The results of design and simulation confirm the advantages and proper performance of the proposed MI.
Full-Text [PDF 2185 kb]   (1337 Downloads)    
  • This paper proposes a grid-connected single-phase micro-inverter (MI) with a rated power of 300 W and an appropriate control strategy for photovoltaic (PV) systems.
  • In the proposed MI, the active power decoupling circuit, which is normally used in a typical single-stage SEPIC-based MI, is eliminated to achieve both a long lifetime and high efficiency.
  • The advantages of the proposed MI are the use of fewer components to provide suitable output voltage level for connection to a single-phase network, continuous input current, limited voltage stress on the switch, high efficiency, long operational lifetime, and high reliability.
  • Lower input current ripple and the presence of film capacitors in the power decoupling circuit increase the lifetime and reliability of the proposed MI.
  • The performance of the proposed control system was verified with the purposes of harvesting maximum PV power, stabilizing the DC-link voltage, injecting low THD sinusoidal current into the grid, and controlling the active power injected into the grid at unity power factor.
  • Moreover, the performance of the proposed control system was studied for a sudden change in solar radiation.

Type of Study: Research Paper | Subject: Converters
Received: 2021/11/23 | Revised: 2024/05/13 | Accepted: 2022/01/29

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
© 2022 by the authors. Licensee IUST, Tehran, Iran. This is an open access journal distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.